An Overview to Furnace Installation

Installing a new furnace or repairing an old one can be done by an HVAC contractor or someone in experience with HVAC systems. Installing a furnace without the help of an HVAC specialist is illegal in some jurisdictions. This is not a simple task, and the required permits must be obtained, as well as inspections to ensure that the HVAC machine was installed correctly and safely. Check Furnace Installation Naperville.

Keep in mind that if you build the furnace yourself, your homeowners insurance can not protect you if anything goes wrong (such as a fire), particularly if you haven’t obtained the necessary permits and inspections. Before you have any furnace installation work completed, make sure to check the permit specifications in your state.

Installing a new furnace is a major undertaking that would almost certainly necessitate the assistance of a couple of people to raise the massive appliance. Along with manpower, you’ll need the right equipment for disconnecting and reconnecting gas or oil pipes, as well as electrical expertise to make the required connections. For installing, fixing, or removing ductwork, you’ll also need the right equipment.

Make sure the gas or oil supply is fully switched off before removing an old furnace. The gas or oil pipe’s valve handle should be turned perpendicular to the gas pipe. Just in case, you may want to turn off your entire gas supply to your home. When disconnecting these pipes, make sure you have enough ventilation because some gas will escape.

Disconnect the old furnace’s electrical components. Disconnecting the power to an electrical furnace can be as easy as unplugging it. You must first switch off the breaker if the furnace is hard wired into the electrical system. Then manually detach the wires that are hard wired into the furnace behind the cover plate. You should not attempt this if you have no prior experience or understanding of electrical wiring.

Attach the ductwork to the furnace and disconnect it. Break through the duct tape with a knife and detach the air intake and delivery ducts. Remove the furnace last. In certain cases, you will need to unscrew it. The extra manpower would come in handy here, as the furnace may be very powerful.