Forklift Safety Tips

Operating a forklift is a serious undertaking, since it involves a great deal of risk when transporting heavy loads around a warehouse. Forklift safety is serious business, and stringent rules are in place to ensure that any forklift driver is as safe as possible. Many drivers have been fired for not operating their forklift safely, so here are some forklift safety tips to keep in mind as you begin your forklift training: Have a look at Safety Lights Forklift for more info on this.
Maintain as much balance as possible with your load. Loads that aren’t balanced can be difficult to manage, so make sure the heaviest part of your load is as close to the forklift’s front wheels as possible.
Ensure that you just load the forklift with as much as the forklift can handle. Never overload the forklift to its full potential, as this would almost certainly result in an accident or the forklift breaking.
Always approach a load with caution, and avoid moving too quickly or abruptly. Regardless of how experienced you believe you are, moving too quickly will result in an accident.
Make sure the forklift is directly in front of the load, but not too near or too far. The recommended distance between the forklift and the load is less than 1 foot but more than 8 inches.
When approaching a load, make sure your forks are at the proper height and move slowly so you can change the forks as you get closer. To ensure that you can approach the load properly, always set the path control to neutral.
Lower and lift the forks only after you’ve come to a full stop and are confident the brakes are in place.
When raising a load, make sure there is enough overhead clearance. Make sure there are no overhead sprinklers, pipes, or lights that may be affected by the increased load.
If you don’t need to drop off or pick up a load, don’t tilt the forks forward. This might cause the forklift to tip over and fall forward.
Avoid tilting the forks forward while driving. This will not only make the load unstable, but it will also make the forklift unstable, causing it to tip over and fall over.
To ensure that the load clears the gap, lift it 4 to 6 inches above the stack beneath it. If the forklift fails to clear the gap, it will pull the lower load off the stack as you drive away.
Before you start lowering the load, make sure the mast is in the vertical position.
As you lower the load, keep it between 6 and 8 inches off the floor.